Back

Zooz 800 Series Z-Wave Long Range Dimmer ZEN72 800LR - The Smartest House

Lights - $25.95
integration

Overview

Description:

  • Full brightness control of your lights, from the physical dimmer and via Z-Wave when added to your smart home hub (sold separately)

  • NEW 800 chip:  more range, faster signal, SmartStart inclusion + S2 security

  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range

  • What's the difference between the ZEN72 and the ZEN77 model? [**Read here!**](https://www.support.getzooz.com/kb/article/1103-zen72-vs-zen77-what-s-the-difference/ "Find out which Zooz dimmer will work better for you")

  • Works with any dimmable LED bulb that accepts triac (forward-phase) dimmers up to 150 W total and with any incandescent bulbs up to 500 W. NOT COMPATIBLE WITH LUMINUS, LITHONIA, OR FEIT BULBS.

  • Direct 3-Way Solution: connects to an existing light switch for 2-point control, no add-on switch necessary! Wires just like the ZEN22 model. Neutral wire required, on/off control only from the secondary switch, use in 4-way installations only if you have direct connection to load and line in one box.

  • Replaceable paddles (almond, brown, and black paddle kits available)

  • Small profile (just 1.1" deep) to fit easily in a crowded or shallow box

  • Adjustable LED indicator: choose the color and brightness that works for you!

  • Scene control: multi-tap triggers available on select hubs\*

  • Night Light Mode: press and hold the lower paddle when dimmer is off to turn the light on to low brightness

  • Double tap to full brightness: now fully adjustable double tap and single tap behavior\*

  • Fully adjustable ramp rate

  • Don't use with fan motors, halogen bulbs, transformers, receptacles, or tube lights!

  • Stronger signal repeater for a more reliable Z-Wave network 

  • NEW: YOU choose the color and brightness level of the LED indicator\*

  • Fits a standard-size face plate for single and multi gang installations (face plate not included)

NOTE: Z-Wave gateway controller required - sold separately. \*Your hub needs to support advanced parameter input to display these features.

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

  • - NEW: brand new product, as delivered by the factory

  • - OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description

  • - REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire jumper, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description

  • - USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire jumper, etc) or parts of the packaging; paddles are clean and don't show signs of wear; **FINAL SALE: not eligible for return, replacement, or warranty service;** hardware and firmware version may be different than the brand new device description

CUSTOM ENGRAVING

You can now order a custom engraving for you smart switch paddles from our partners. Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.

INSTALLATION

Before beginning the installation process, make sure the load you are about to connect does not exceed 500W for incandescent lights or 150W for DIMMABLE LED. Do NOT use this dimmer to control fans, receptacles, or tube lights.

Check your wiring first and confirm that you have all of the following present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

If you are not comfortable identifying the wiring and performing the installation, please consult a licensed electrician.

Here are some helpful installation tips:

  • - Make sure the gang box you are about to install the switch at features a neutral wire - you will not be able to connect the ZEN72 switch properly without a neutral wire. Neutral is usually in a bundle of white wires NOT connected to your original mechanical switch.

  • - Unlike your regular electrical switches, Z-Wave switches require particular wires to be connected exactly as indicated - line and load wires cannot be swapped as it often happens to the most experienced electricians.

  • - Z-Wave dimmers will work best with incandescent and high-quality DIMMABLE LED bulbs with at least 15 Watts on load.

How to include the 800 Series Dimmer switch to your smart home network?

  1. Bring your Z-Wave gateway hub or controller as close to the switch as possible

  2. Put your Z-Wave controller in inclusion mode

  3. Tap the UPPER paddle of the switch 3 times very quickly to finalize the inclusion process

  4. A new dimmer (or multilevel switch) device will appear on your controller's device list

 

NOTE:  Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches. This switch may wire differently in 3-way or 4-way installation than your other Zooz switch.

### WORKS WITH

  • 2GIG (no advanced settings or scene control)

  • ADT Pulse (no advanced settings or scene control)

  • Fibaro Home Center 2

  • [Fibaro Home Center Lite](https://www.thesmartesthouse.com/products/fibaro-home-center-lite-z-wave-smart-home-controller-fghcl "Shop this hub")

  • Home Assistant (Z-Wave JS)

  • HomeSeer

  • Homey ([Zooz App for Homey](https://homey.app/en-us/app/com.getzooz/Zooz/ "Zooz App for Homey"))

  • Hubitat

  • InControl

  • Indigo

  • ISY994Zw

  • Open Z-Wave

  • Ring (no advanced settings or scene control)

  • SmartThings

  • Staples Connect DLink (no advanced settings - on/off control only)

  • Wink and Wink 2 (no advanced settings)

SPECIFICATIONS

  • Z-Wave Region: US/MX/CA

  • Power: 120 VAC, 60 Hz

  • Maximum Loads: 500W Incandescent, 150W LED

  • Range: Up to 200 feet line of sight, up to 1 mile with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)

  • Dimensions: 1.16" deep, 1.75" wide, 4.1" tall

  • Operating Temperature: 32-104° F (0-40° C)

  • Installation and Use: Indoor only

Related Products